牛角SNAP-IN型铝电解电容器,适用于变频器、电源产品、直流逆变焊机、点焊机及其他电子设备。具备中高压、宽温度范围(-40℃至+105℃),额定电压范围160V至500V,电容量范围33μF至4700μF。耐久性达10000小时,高温贮存500小时,确保稳定性能。
牛角SNAP-IN型铝电解电容器,适用于变频器、电源产品、直流逆变焊机、点焊机及其他电子设备。具备中高压、宽温度范围(-40℃至+105℃),额定电压范围160V至500V,电容量范围33μF至4700μF。耐久性达10000小时,高温贮存500小时,确保稳定性能。
产品使用范围:
产品于变频器、电源产品、直流逆变焊机、点焊机和其他电子设备。
+85℃&+105℃,1000小时 Load life of 1000 hours at +85℃&+105℃
中高压,宽温度Medium and high voltage, wide temperature ranges.
■ 主要技术性能 Specifications
项目Item | 特性Characteristics | |||||
使用温度范围Operating temperature range(℃) | (-40~+85℃)-40~+105℃ | (-25~+85℃)-25~+105℃ | ||||
额定电压范围Rated voltage range(V) | 160~250 | 315~400 | ||||
标称电容量范围Nominal capacitance range(μF) | 33~470 | |||||
标称电容量允许偏差Capacitance tolerance(%) | ±20(20℃,120Hz) | |||||
漏电流Leakage current(μA) | I≤0.02CRUR+25 | |||||
损耗角正切值Dissipation factor(tgδ) | ||||||
UR (V) | 160~250 | 315~400 | ||||
tg δ(max.) | 0.18 | 0.23 | ||||
20℃,120Hz | ||||||
耐久性Load life(+105℃) | 时间 time | 1000小时 1000 hours | ||||
容量变化率Capacitance change | ±20%初始测量值以内Within ±20% of the initial value | |||||
漏电流Leakage current | ≤初始规定值Not more than the Initial specified value | |||||
损耗角正切值Dissipation factor | ≤200%初始规定值Not more than 200% of the Initial specified value | |||||
高温贮存Shelf life(+105℃) | ||||||
时间 time | 500小时500 hours | |||||
容量变化率Capacitance change | ±20%初始测量值以内Within ±20% of the initial value | |||||
漏电流Leakage current | ≤初始规定值Not more than the Initial specified value | |||||
损耗角正切值Dissipation factor | ≤200%初始规定值Not more than 200% of the Initial specified value | |||||
试验后:施加标称电压30分钟,于24至48小时之间测试。 |
■外形尺寸表 Case size table
D±2mm | 22 | 26 | 30 | |||
H±3mm | 30 | 40 | 40 | 50 | 40 | 50 |
■ 允许纹波电流的修正系数 Coefficient of allowable ripple current
频率(Hz) UR(V) | 50(60) | 100(120) | 1K | 10K | 环境温度(℃)Temperature | ≤+40 | +55 | +70 | +85 | +105 |
160~250 | 0.8 | 1.0 | 1.25 | 1.4 | 修正系数Coefficient | 2.7 | 2.5 | 2.1 | 1.7 | 1.0 |
315~400 | 0.8 | 1.0 | 1.2 | 1.3 |
版权所有 © 康派电容 未经许可 严禁复制 Copyright © 2016 www.capaca.com All rights reserved 浙ICP备05028567号